Description
Thermometer for thermocouples of type K with two inputs and WiFi interface. The accuracy depends on the thermocouple. Measuring range -50 to +1350 °C.
Papago 2TC WiFi belongs to a family of Papago modules with some common properties. These are mainly the following:
- WiFi interface, internal website (in Czech and English) and many standard communication protocols
- Network and WiFi parameters configurable via USB.
- Internal memory and real-time clock. Measured data including the time of measurement is automatically stored in the memory in the event that communication is lost. The data is automatically sent after the connection is restored.
- Elegant but robust metal box that can be mounted on a DIN rail. The box bears descriptions that allow connection without having to consult the manual. Also LED indicators for all important states help commissioning.
- The possibility to display, store and analyze data in the Wix, which is free of charge for a smaller number of measured parameters.
Specific features of Papago 2TC ETH
- Measures two external thermocouples of type K (sensors are not included)
- Range: -50 to +1350°C, increment 0.1°C
- Measurements per second: 1, 2 or 5 according to the settings
- Connection of the two sensors by standard thermocouple connector
- WiFi 2,4 GHz (IEEE 802.11 b/g and IEEE 802.11n (one stream), IEEE 802.11 d/h/i/j/k/w/r)
- Network and WiFi parameters configurable via USB (microUSB connector).
- Antenna: SMA RP
- External power supply 11 to 58 V DC available in the following variants:
-
Papago 2TC WIFI EU: EU power supply (type C), power supply with European plug
-
Papago 2TC WIFI AU: AU Power Supply (Type I), power supply with Australian plug
-
Papago 2TC WIFI UK: UK power supply (type G), power adapter with UK plug
-
Papago 2TC WIFI US: US power supply (type A), power adapter with US plug
-
- Typical power consumption 1.8 W
- Package contents: Papago 2TC WIFI, small antenna, mini USB cable, power adaptor 15V/0,8A)
Supported Communication Protocols:
All products of Papago family - of course Papago 2 TWIFIC - offer a variety of communication protocols. Papago devices can thus easily weren integrieret into existing systems. Of course you can configure software Papgo also via Web or Windows.
- MODBUS TCP - a standard industry protocol
- SNMP (Incl. TRAP messages for specific events)
- HTTP GET with plain or encrypted data (128 bit AES)
- EMAIL for notification of special events
- XML with the current measurement data
- Spinel (Binary protocol - developed by Papouch)
XML Examples for the Papago:
1 |
|
2 |
<root xmlns="http://www.mizzitante.at/xml/papago/act"> |
3 |
<sns id="1" name="Sensor A" type="1" status="0" unit="0" val="2.9" w-min="-10.8" w-max="15.0" type2="2" status2="0"unit2="1" val2="79.2" w-min2="60" w-max2="100" type3="3" status3="0" unit3="0" val3="-0.3" w-min3="" w-max3="" /> |
4 |
<sns id="2" name="Sensor B" type="1" status="0" unit="0" val="88.1" w-min="50.0" w-max="90.0" /> |
5 |
<status location="U Papoucha" time="04/30/2015 09:34:02" level="2" /> |
6 |
|
File:
| Datasheet Papago 2TC Wifi |
1.56 MB |  |
| MIB table SNMP MIB table for Papago 2TH, 2TC, 2PT and PTS from version 1.5. |
1.38 KB | |
| Papago WiFi Configurator Papago WiFi Configuration-Software |
505.18 KB | |
Recommended products:
 |
Switching power supply unit 15V / 0.8A with EU plugSwitching power supply 15V /0.8A. Wallplug adaptor type. Cable length 1,8m with coaxial connector. 11,28 EUR (20 % VAT incl. excl. Shipping costs) |
 |
DIN rail holder - mountedMetal holder for DIN rail 35mm (TS 35), mounted on Papouch s.r.o. device. 9,12 EUR (20 % VAT incl. excl. Shipping costs) |
This Product was added to our catalogue on Friday 04 March, 2016.
