Deutsch English

THT2 - RS485 Thermometer and hygrometer with Sensor

THT2 - RS485 Thermometer and hygrometer with Sensor
Zoom image

72,00 EUR

20 % VAT incl. excl. Shipping costs

Shipping time: 2 - 5 working days

Product no.: THT2
For further information, please visit the homepage of this product.

THT2 - RS485 Thermometer and hygrometer with Sensor

Main module for digital sensors of temperature and humidity with dew point calculation. Communicaters via RS485 line - up to 1.2Km. Metal enclosure, detachable sensor (not included, sold separately).

THT2 is an intelligent digital sensor for temperature and/or humidity measurement. Humidity is measured in percent, temperature in degrees Celsius or Fahrenheit, dew point is calculated in degrees celsius as well. Ultra low energy consumption design allows you to create a network of senors(up to 31 un single line) up to 1.2 Km long with only 4 wires (1 pair data, 1 pair power, UTP, STP or FTP cable is recommended.)

THT2 with temperature and humidity sensor (not included, sold separately)

THT2 with temperature and humidity sensor connected (not included, sold separately)

Features

  • Measures relative humidity in range 0 % to 100 % (with proper sensor connected)
  • Measures temperature in range -40°C to +123,8 °C (with proper sensor connected)
  • Calculates dew point
  • Calulates temperatures in several units (°C, °F, K)
  • Extreme values memory – THT2 saves maximum and minimum measured-out valu of each quantity.
  • Compatible sensors: temperature and humidity or temperature only (sensor is sold separately)
  • RS485 communication
  • Spinel and ModBus RTU protocols are supported
  • ultra low power consumption design
  • unstabilised power compatible
  • PC software: Wix
  • Connection to PC: Any RS485 converter.
    Tip: There is also sensor like THT2 that connects directly to Ethernet - TH2E.

THT2 connection topology - direct and through Ethernet converter

Example of the THT2 topology - direct and over Ethernet

Compatible sensors

THT2 is a base module only, no sensor is included. Two types of sensors can be connected to THT2 module (on a cable 1 - 20m):

  • Temperature, humidity, dew point: Polymer sensor on a cable with accuracy ± 2 % RH, underneath a gore-tex sieve. temperature range is -40°C to  +123,8 °C, humidity range is 0 % to 100 %.
  • Temperature only: Sensor in metal rod on a cable. Rugged with IP 68 coverage. Temperature range: -55°C to +125 °C

How do I measure temperature, humidity and dew point? 

Windows software:
Our univesal software Wix can work with THT2, it can display, save an dmonitor measured-out values.

Other system integration:
Current temperature, humidity and dew point are easily readable via RS485 line. THT can communicate via Spinel or ModBus RTU protocols. That is to cover common requirements for higher systems integration (PCs and PLCs). If you need to integrate THT2 to your specific system, we are here to help you. In chuch case, do not hesitate to contact us.

THT2 - RS485 Thermometer and hygrometer with Sensor THT2 - RS485 Thermometer and hygrometer with Sensor THT2 - RS485 Thermometer and hygrometer with Sensor

Recommended products:

Temperature sensor

Temperature sensor

Temperature only sensor: choose length

from 21,60 EUR (20 % VAT incl. excl. Shipping costs)
Temperature and humidity sensor

Temperature and humidity sensor

from 38,40 EUR (20 % VAT incl. excl. Shipping costs)

This product is compatible with:

Papago 2TH WIFI: 2x thermometer and hygrometer with dew point - WIFI Interface

Papago 2TH WIFI: 2x thermometer and hygrometer with dew point - WIFI Interface

Two combined sensors with WiFi interface. It measures only temperature or temperature, humidity and dew point. Temperatures measured in the range from -55 to +125 °C.

190,80 EUR (20 % VAT incl. excl. Shipping costs)

Customers who bought this product also bought the following products:

SB485 - USB to RS485/RS422 isolated converter

SB485 - USB to RS485/RS422 isolated converter

118,80 EUR (20 % VAT incl. excl. Shipping costs)
TCP2RTU - MODBUS TCP to MODBUS RTU Converter - variant: RS485

TCP2RTU - MODBUS TCP to MODBUS RTU Converter - variant: RS485

TCP2RTU is a transparent converter of the MODBUS TCP protocol, running over Ethernet, into the MODBUS RTU protocol, running over RS232, RS485 and RS422 lines. TCP2RTU is suitable for systems where a device communicating via the MODBUS TCP protocol is the Master and devices using the MODBUS RTU protocol are of the Slave type.

182,40 EUR (20 % VAT incl. excl. Shipping costs)
TH2E - Ethernet thermometer and hygrometer with Sensor

TH2E - Ethernet thermometer and hygrometer with Sensor

TH2E is a Thermometer and Hygrometer that can calculate a dew point. It can store measured-out values into its internal memory, send the measured-out values to your server, send e-mails when a threshold is exceeded, TH2E remembers extremes and it has an internal WEB server. TH2E is fully configurable via its WEB interface. SNMP and MODBUS TCP are also supported.

from 204,00 EUR (20 % VAT incl. excl. Shipping costs)
TQS3 I - RS485 Interior thermometer

TQS3 I - RS485 Interior thermometer

Digital thermometer in an indoor make - for in-building temperature measurement. Measuring range is  -55 to +125 °C. Thermometer communicates via RS485 line on Spinel or MODBUS RTU protocol. The TQS3 intelligent temperature sensor can be connected to other modules by a single bus, which can be up to 1200 m long.

New feature: The users can now switch between the Spinel and Modbus RTU communication protocols using ModbusConfigurator software.

48,00 EUR (20 % VAT incl. excl. Shipping costs)
TQS3 O - Outdoor RS485 Thermometer

TQS3 O - Outdoor RS485 Thermometer

Description

A digital thermometer for RS485; outdoor design with IP65 protection. It measures temperatures in the range from -55 ° C to +125 ° C and the measured value is sent in degrees Celsius. The thermometer has very low consumption and communicates via Spinel or MODBUS protocols. The TQS3 intelligent temperature sensor can be connected to other modules by a single bus, which can be up to 1200 m long.

New feature: The users can now switch between the Spinel and Modbus RTU communication protocols using ModbusConfigurator software.

48,00 EUR (20 % VAT incl. excl. Shipping costs)
TME multi: Temperature and humidity via Ethernet

TME multi: Temperature and humidity via Ethernet

A device for measuring temperature and humidity at up to 32 locations. Configuration and preview of all measured values via a website. TME multi is able to send the current values to the server using HTTP GET requests and can also communicate via SNMP and Modbus TCP protocols. When the critical limits are exceeded the system sends e-mail warnings or SNMP traps.

142,80 EUR (20 % VAT incl. excl. Shipping costs)

This Product was added to our catalogue on Thursday 03 April, 2014.

[<<First] | [<Back] | [Overview] | [Next>] | Product 4 of 5 in this category

Shopping cart

You do not have any products in your shopping cart yet.

Welcome back!

E-mail address:
Password:
Forgot your password?

Newsletter subscription

E-mail address:

Customer group


Customer group: Guest

Manufacturer information

Papouch
More products

Manufacturer

Parse Time: 0.312s