Deutsch English

Web Sensor T3510 - remote thermometer, hygrometer and pressure

Web Sensor T3510 - remote thermometer, hygrometer and pressure
Zoom image

541,20 EUR

20 % VAT incl. excl. Shipping costs

Shipping time: 2 Weeks

Product no.: T7611 PoE
Web Sensor T3510 - remote thermometer, hygrometer and pressure

Ambient temperature, relative humidity, atmospheric pressure t-line Web sensor with Power over Ethernet feature. Remote alarm.

 

PoE Web Sensor with relative humidity and temperature probe, 1m cable. Cable lengths 2m or 4m available optionally. Built-in atmospheric pressure sensor.

High precision capacitive polymer sensor ensures excellent long term calibration stability and ultimate accuracy. Dual line LCD is an advantage. Power over Ethernet feature according IEEE 802.3af is supported. Measured values are also converted to other humidity interpretation: dew point temperature, absolute humidity, specific humidity, mixing ratio and specific enthalpy.

FEATURES:

Temperature and humidity
 

Web Sensor is designed for measuring from temperature and humidity cable probe and from built-in pressure sensor. High precision capacitive polymer sensor ensures excellent calibration long term stability, inertia against water and condensation. Web Sensor is designed for use in non-aggressive environment. Degrees Celsius and Fahrenheit are user selectable. Atmospheric pressure units are also user selectable.

Dew point and computed quantities
  Measured values are also converted to other humidity interpretation: dew point temperature, absolute humidity, specific humidity, mixing ratio and specific enthalpy. User can select one of these interpretation.
Dual line LCD
  Large dual line LCD for simultaneous display of temperature, relative humidity or other calculated humidity interpretation is an advantage. Displayed values are user selectable. Display can be switched off.
Ethernet interface
  10Base-T/100Base-TX Ethernet interface via standard RJ45 connector. IP address can be obtain automatically from DHCP server or set manually. Internet protocol version 4 is supported only.
WWW server
  Actual measured values are accessible via powerful embedded web server. Web pages are ready for access from mobile devices like smartphones and tablets. Device configuration via web pages is possible too. The device allows you to user customize the design of web pages.
History values memory
  Measured values are stored into history memory according selected time interval. Capacity of the memory is 1000 records for each channel. Values inside history memory are not backuped. Memory is cleared after device restart.
History graphs
  Graphs with history values are accessible via web pages. Modern HTML5 canvas graphic component allows to use graphs from thousands of devices. It is not problem show graphs on tablets or smartphones. All modern web browsers are supported - Firefox, Opera, Chrome or Internet Explorer 9.
Email
  Warning email are sent when measured value exceed selected limits. Emails are also send when values returns back into safe range. SMTP authentication is supported, but SSL not. Domain name for SMTP server address is supported. Emails with CSV file attachment can be sent at selected intervals.
History export to CSV
  History values can be exported for next processing by the CSV file. CSV file can be processed inside spreadsheet application like Microsoft Excel or OpenOffice Calc. Two formats of CSV file are supported - dot and comma decimal point separators. Timestamps inside CSV file are shown when device time is synchronised by the SNTP server. CSV file can be downloaded from web pages or periodically send as email attachment.
ModbusTCP protocol
  Modbus protocol for communication with SCADA systems or third party software. Device use Modbus TCP protocol version. Two Modbus clients can be connected to device at one moment.
Actual values via XML
  XML protocol for actual measured values reading. This protocol is suitable for device integration into 3rd party SCADA systems.
SNMP protocol
  SNMP version 1 protocol for IT infrastructure. Using SNMP protocol you can read actual measured values, alarm status and alarm parameters. Via SNMP protocol is also possible to get last 1000 measured values from history table. MIB tables with OID description are available.
SNMP Trap
  SNMP Trap for IT infrastructure. The device allows sending Traps to selected Trap receiver server. Traps are sent in case of alarm on channel or at error states like unable to send email, unable to deliver SOAP message, etc.
SOAP protocol
  The device allows to send currently measured values via SOAP v1.1 protocol. The device sends values in XML format to the web server. The advantage of this protocol is that communication is initialized by the device side. Due to it is not necessary use port forwarding.
Syslog protocol
  Syslog protocol for IT infrastructure monitoring systems. The device allows sending text message to selected Syslog server. Messages are sent in case of alarm on channel or at error states like unable to send email, unable to deliver SOAP message, etc.
SNTP protocol - time synchronization
  Time synchronisation with SNTP server. Actual time is shown at web pages and is necessary for timestamps inside CSV files. Synchronisation interval can be set to one day or to one hour.
MIN/MAX memory
  Memory for minimum and maximum values. Memory is independent on values in history memory. Minimum and maximum values can be cleared according user requirements.

Technical Data:

Technical parameters Value
Output Ethernet
Measured Value Relative Humidity + Temperature
Construction Type Ambient Air
Design Industrial
Temperature Measuring Range -30 to +80°C
Relay Output No
Two-State Input No
Lcd Display Yes
Relative humidity range 0 to 100%
Accuracy of relative humidity measurement ±2.5% relative humidity from 5 to 95% at 23°C
Accuracy of temperature output ±0.6°C
Resolution 0.1°C, 0.1%RH
Measuring interval 2s
Available temperature units degrees Celsius, degrees Fahrenheit
Computed values dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
Accuracy and range of dew point temperature output - for more details see graphs in manual ±1.5°C at ambient temperature lower than 25°C and RH>30%
range -60 to +80°C
Temperature compensation of the humidity sensor all temperature range
Temperature operating range -30 to +80°C
IP protection IP30 electronics
LAN connection RJ-45 connector, 10Base-T or 100Base-TX
Communication protocols WWW, ModbusTCP, SNMPv1, SOAP, XML
Alarm protocols E-mail, SNMP Trap, Syslog
Configuration T-Sensor, WWW configuration
Power 9 to 30Vdc, maximum consumption 1W
Power connector co-axial, diameter 5.5 x 2.1mm
Dimensions 88.5 x 147.5 x 39.5mm (W x H x D), stem length 75mm
Weight approximately 155g

Included in delivery:

  • T3510 Web Sensor
  • Quick start manual
  • Traceable calibration certificate
  • Technical support at discussion forum
Web Sensor T3510 - remote thermometer, hygrometer and pressure Web Sensor T3510 - remote thermometer, hygrometer and pressure Web Sensor T3510 - remote thermometer, hygrometer and pressure

Customers who bought this product also bought the following products:

TME - Ethernet Thermometer with Sensor

TME - Ethernet Thermometer with Sensor

TME is a Thermometer with direct output to Ethernet (IP Thermometer), Measuring range is -55°C to +125°C.

TME has an internal WEB server, which allows you to view Temperature directly in your WEB browser - no additional software is required. TME is fully configurable via WEB interface, Temperature can be transmitted over TCP/IP in ASCII (no conversion needed). Supported protocols are: TCP, SNMP, SMTP (e-mail), MODBUS TCP a XML. Temperatue can be easily integrated in your existing WEB site vias standard HTTP GET functions.

Sensor cable is 3 meters long as a standard. If you require, we can produce TME with up to 20m sensor lead. Do not hesitate to contact us if you need a different length.

from 169,56 EUR (20 % VAT incl. excl. Shipping costs)
AD4ETH - Ethernet measurement module

AD4ETH - Ethernet measurement module

Analog measurement module AD4ETH is a four input A/D converter allowing you to measure up to four analogue signals 0-10V or 0(4)-20mA. Measured-out values can be viewed via a WEB interface, AD4ETH also supports TCP, SNMP and many other protocols.

from 284,40 EUR (20 % VAT incl. excl. Shipping costs)
PD-9001GR - single port PoE midspan with 30 watt output

PD-9001GR - single port PoE midspan with 30 watt output

PoE midspan - 1 port with 30 watt output

98,40 EUR (20 % VAT incl. excl. Shipping costs)

This Product was added to our catalogue on Wednesday 14 May, 2014.

[<<First] | [<Back] | [Overview] | [Next>] | [last>>] | Product 20 of 22 in this category

Shopping cart

You do not have any products in your shopping cart yet.

Welcome back!

E-mail address:
Password:
Forgot your password?

Newsletter subscription

E-mail address:

Customer group


Customer group: Guest

Manufacturer information

Manufacturer

Parse Time: 0.240s