Web Sensor P8510 - remote thermometer - mizziTANTE.at

Details
Customer-tip

FEATURES:

Internal tempearture sensor
	Web Sensor is designed for measuring temperature from internal sensor. Temperature can be displayed in degree of Celsius or degree of Fahrenheit.

Ethernet interface
	10Base-T/100Base-TX Ethernet interface via standard RJ45 connector. IP address can be obtain automatically from DHCP server or set manually. Internet protocol version 4 is supported only.

WWW server
	Actual measured values are accessible via powerful embedded web server. Web pages are ready for access from mobile devices like smartphones and tablets. Web Sensor configuration via web pages is possible too. Web Sensor allows to user customize the design of web pages.

History values memory
	Measured values are stored into history memory according selected time interval. Capacity of the memory is 1000 records. Values inside history memory are not backuped. Memory is cleared after device restart.

History graphs
	Graphs with history values are accessible via web pages. Modern HTML5 canvas graphic component allows to use graphs from thousands of devices. It is not problem show graphs on tablets or smartphones. All modern web browsers are supported - Firefox, Opera, Chrome or Internet Explorer 9.

History export to CSV

History values can be exported for next processing by the CSV file. CSV file can be processed inside spreadsheet application like Microsoft Excel or OpenOffice Calc. Two formats of CSV file are supported - dot and comma decimal point separators. Timestamps inside CSV file are shown when device time is synchronised by the SNTP server. CSV file can be downloaded from web pages or periodically send as email attachment.

Email
	Warning email are sent when measured value exceed selected limits. Emails are also send when values returns back into safe range. SMTP authentication is supported, but SSL not. Emails with CSV file attachment can be sent at selected intervals.

ModbusTCP protocol
	Modbus protocol for communication with SCADA systems or third party software. Web Sensor uses Modbus TCP protocol version. Two Modbus clients can be connected to device at one moment.

Actual values via XML
	XML protocol for actual measured values reading. This protocol is suitable for device integration into 3rd party SCADA systems.

SNMP protocol
	SNMP version 1 protocol for IT infrastructure. Using SNMP protocol you can read actual measured values, alarm status and alarm parameters. Via SNMP protocol is also possible to get last 1000 measured values from history table. MIB tables with OID description are available.

SNMP Trap
	SNMP Trap for IT infrastructure. Web Sensor allows sending Traps to selected Trap receiver server. Traps are sent in case of alarm or at error states like unable to send email, unable to deliver SOAP message, etc.

SOAP protocol
	Web Sensor allows to send currently measured values via SOAP v1.1 protocol. The device sends values in XML format to the web server. The advantage of this protocol is that communication is initialized by the device side. Due to it is not necessary use port forwarding.

Syslog protocol
	Syslog protocol for IT infrastructure monitoring systems. Web Sensors allow sending text message to selected Syslog server. Messages are sent in case of alarm or at error states like unable to send email, unable to deliver SOAP message, etc.

SNTP protocol - time synchronization
	Time synchronisation with SNTP server. Actual time is shown at web pages and is necessary for timestamps inside CSV files. Synchronisation interval can be set to one day or to one hour.

Technical Data:

Technical parameters	Value
Output	Ethernet
Measured Value	Temperature
Construction Type	Ambient Air
Design	Industrial
Temperature Measuring Range	-30 to +80°C
Relay Output	No
Two-State Input	No
Lcd Display	No
Accuracy of temperature measurement	±0.8°C over -10°C, ±2°C below -10°C
Resolution	0.1°C
Measuring interval	2s
Supported units	degrees Celsius, degrees Fahrenheit
Temperature operating range	-30 to +80°C
IP protection	IP30
LAN connection	RJ-45 connector, 10Base-T or 100Base-TX
Communication protocols	WWW, ModbusTCP, SNMPv1, SOAP, XML
Protocols for alarms	E-mail, SNMP Trap, Syslog
Configuration	T-Sensor, WWW configuration
Power	5 Vdc, max. power consumption 1W
Power connector	co-axial, diameter 5.5 x 2.1 mm
Dimensions	88.5 x 126 x 39.5 mm (W x H x D), stem length 53 mm
Weight	approximately 130g

Included in delivery:

P8510 Web Sensor
Quick start manual
Traceable calibration certificate
Technical support at discussion forum

Customers who bought this product also bought the following products:

Web Sensor T3610 with PoE - remote thermometer hygrometer with Ethernet interface

Ambient temperature, relative humidity t-line Web sensor with Power over Ethernet feature. Remote alarm.

392,40 EUR (20 % VAT incl. excl. Shipping costs)

This Product was added to our catalogue on Tuesday 13 May, 2014.

Categories

Quick purchase

More about...

Information

Web Sensor P8510 - remote thermometer

FEATURES:

Technical Data:

Included in delivery:

Customers who bought this product also bought the following products:

Web Sensor T3610 with PoE - remote thermometer hygrometer with Ethernet interface

Shopping cart

Welcome back!

Newsletter subscription

Customer group

Manufacturer information

Manufacturer

Search:

Advanced search

E-mail address:

Password:

Forgot your password?