Deutsch English

TME multi: Temperature and humidity via Ethernet

TME multi: Temperature and humidity via Ethernet
Zoom image

142,80 EUR

20 % VAT incl. excl. Shipping costs

Shipping time: 2 - 5 working days

Product no.: TME_MULTI_1
TME multi: Temperature and humidity via Ethernet

A device for measuring temperature and humidity at up to 32 locations. Configuration and preview of all measured values via a website. TME multi is able to send the current values to the server using HTTP GET requests and can also communicate via SNMP and Modbus TCP protocols. When the critical limits are exceeded the system sends e-mail warnings or SNMP traps.

Netzwerk Thermometer und Hygrometer

New web interface to view the values and configure all the parameters.

TME multi is a completely autonomous system that communicates independently with sensors connected via the RS485 line and sends the obtained data to a remote server. No computer or any other superior system is needed to measure and send the obtained values.

You can check the current temperature at any time. In addition, you can set the limit values at which an e-mail will be sent to your address. It can be easily forwarded to a mobile phone as an SMS.

The measured values are sent as the HTTP GET form data; they are also available in the XML format or via the Modbus TCP and SNMP protocols. Thus, data can be easily integrated into your company's system.

Connection of sensors and TME multi

The system can contain up to 32 devices. Four wires are sufficient to make the connections. The total cable length can be up to 1200 metres.

All sensors can be easily configured and settings done via a web interface.

Properties of the measuring system

  • A unit for measuring the temperature and humidity, communicating with TQS3 thermometers and THT2 sensors (temperature, humidity, dew point).
  • Bis zu 32 Sensoren an einem Kabel bei einer Gesamtlänge von bis zu 1200 Meter
  • Direkte Verbindung zum Computernetzwerk (Internet)
  • Interne Website mit einer Tabelle der aktuellen Werte
  • Neues Feature: Konfiguration aller Parameter via Web Interface
  • Alle Werte in XML-Format
  • Werte werden an den Server im Netzwerk via HTTP GET Request gesendet
  • SNMP Protokol
  • Neues Feature: Modbus TCP Protokoll
  • Neues Feature: einfache Integration neuer Sensoren über die Seriennummer
  • Versenden von E-Mails und SNMP-Traps sobald ein Wert das vordefinierte Limit überschreitet
  • Inhalt der Verpackung: (1) TME Multi, (2) Netzgerät, (3) 1 m Patch Kabel.

Applikationen des TME multi

  • Messen von Temperatur und Feuchtigkeit an multiplen Stellen und Anzeige der Werte auf der Website.
  • Überwacht Temperatur und Feuchtigkeit und sendet die Werte an den Webserver.

Alle Werte sind als XML verfügbar

Beispiel einer XML Datei als TME multi mit 2 Sensoren:

1 <root>
2     <sns id="1" vc="199" name="Outdoor" watch="1" max="300" min="-150" batt="3" s1="0" v1="-52" s2="0" v2="123" s3="0" v3="123" />
3     <sns id="3" vc="523" name="Sauna" watch="2" max="1000" min="800" batt="3" s1="0" v1="369" s2="0" v2="970" s3="0" v3="150" />
4     <status unit="C" location="Apartment" />
5 root>

 

TME multi: Temperature and humidity via Ethernet TME multi: Temperature and humidity via Ethernet TME multi: Temperature and humidity via Ethernet TME multi: Temperature and humidity via Ethernet

Recommended products:

TQS3 I - RS485 Interior thermometer

TQS3 I - RS485 Interior thermometer

Digital thermometer in an indoor make - for in-building temperature measurement. Measuring range is  -55 to +125 °C. Thermometer communicates via RS485 line on Spinel or MODBUS RTU protocol. The TQS3 intelligent temperature sensor can be connected to other modules by a single bus, which can be up to 1200 m long.

New feature: The users can now switch between the Spinel and Modbus RTU communication protocols using ModbusConfigurator software.

48,00 EUR (20 % VAT incl. excl. Shipping costs)
Temperature and humidity sensor

Temperature and humidity sensor

from 38,40 EUR (20 % VAT incl. excl. Shipping costs)

Customers who bought this product also bought the following products:

TH2E - Ethernet thermometer and hygrometer with Sensor

TH2E - Ethernet thermometer and hygrometer with Sensor

TH2E is a Thermometer and Hygrometer that can calculate a dew point. It can store measured-out values into its internal memory, send the measured-out values to your server, send e-mails when a threshold is exceeded, TH2E remembers extremes and it has an internal WEB server. TH2E is fully configurable via its WEB interface. SNMP and MODBUS TCP are also supported.

from 204,00 EUR (20 % VAT incl. excl. Shipping costs)
TQS3 P - RS485 thermometer on pipe

TQS3 P - RS485 thermometer on pipe

RS485 digital thermometer for pipe temperature measurement. Measuring range is  -55 to +125 °C. Thermometer communicates via RS485 line on Spinel or MODBUS RTU protocol. The TQS3 intelligent temperature sensor can be connected to other modules by a single bus, which can be up to 1200 m long.

50,40 EUR (20 % VAT incl. excl. Shipping costs)
THT2 - RS485 Thermometer and hygrometer with Sensor

THT2 - RS485 Thermometer and hygrometer with Sensor

Main module for digital sensors of temperature and humidity with dew point calculation. Communicaters via RS485 line - up to 1.2Km. Metal enclosure, detachable sensor (not included, sold separately).

72,00 EUR (20 % VAT incl. excl. Shipping costs)
Temperature and humidity sensor

Temperature and humidity sensor

from 38,40 EUR (20 % VAT incl. excl. Shipping costs)

This Product was added to our catalogue on Sunday 04 May, 2014.

[Overview] | [Next>] | [last>>] | Product 1 of 24 in this category

Shopping cart

You do not have any products in your shopping cart yet.

Welcome back!

E-mail address:
Password:
Forgot your password?

Newsletter subscription

E-mail address:

Customer group


Customer group: Guest

Manufacturer information

Papouch
More products

Manufacturer

Parse Time: 0.269s