TH2E is a Thermometer and Hygrometer that can calculate a dew point. It can store measured-out values into its internal memory, send the measured-out values to your server, send e-mails when a threshold is exceeded, TH2E remembers extremes and it has an internal WEB server. TH2E is fully configurable via its WEB interface. SNMP and MODBUS TCP are also supported.
Communication options of Ethernet hygrometer
- Internal WEB page for viewing and configuration. Available in Czech and English, °C, °F or K.
- Web interface for advanced devices such as the iPhone, as well as for older mobile phones and PDAs.
- XML file containing current values
- HTTP GET: Sending of the measured-out values to your server. Easy processing on your server.
- SNMP protocol: Allows you to read current states from internal objects and send traps with measured-out values.
- E-mail: If any value exceeds set-up thresholds, TH2E can send an informative e-mail.
- TCP protocol: Automatic sending of the measured-out values as a request-response communictaion in Spinel protocol
- MODBUS TCP protocol
What can LAN hygrometer do?
Depending on sensor connected to it, TH2E is able to measure temperature, humidity, store the measured-out values into its internal memory (including time of measurement) and calculate dew point. Measured-out values can be viewed via WEB browser. TH2E is capable to communicate via many standardized protocols, which makes it an ideal component for further integration to an existing system.
Many of TCP/IP family protocols are supported. Available are for example: TCP data channel, SNMP and MODBUS TCP protocols, e-mail sending, HTTP GET automatic sending to a remote server. Measured-out values and settings parameters are also available in XML format etc.
All settings can be adjusted via WEB interface. Brief help pops up for all parameters. WEB interface is available in Czech and English.
Parameters of Ethernet hygrometer
- Thermometer and hygrometer. TH2E also calculates the dew point.
- Relative humidity is measured from 0 through 100%.
- Temperature can be measured from -55°C to +125°C.
- Automatic calculation of the dew point.
- Several temperature units available (°C, °F, K).
- Internal memory for 1000 records (each record with its's time stamp). Several storing modes:
(1) Time - saving every X minutes;
(2) Differential - to save the recording occurs only when the measured value of X moves from the last saved values;
(3) Extreme values watching - saves only the value at which the change tendency observed variables. - Onboard RTC circuit (Real Time Clock)
- Extreme values memory - TH2E remembers maximum and minimum measured value of each measured variable, including the date and time of measurement.
- Thermometer and hygrometer sensor has a IP54 coverage (temperature sensor has a IP68 coverage)
- Connection and communication via a computer network (Ethernet; LAN)
- Data transfer via TCP/IP (10/100 Ethernet).
- Viewing and configuration via a WEB interface.
- Detachable sensor - temperature+humidity or temperature only (Temperatur/Humidity Sensor included!).
- Sensor cable is highly resistant to temperatures and chemicals (Silicon cable).
- TH2E is powered from 5 V to 30 V (Wall plug adaptor PSU included)
- DIN rail mount available.
Differences between the TH2e and the TME:
Current and historical weather-data measured by the TH2E Ethernet Thermometer and Hygrometer at our location can found here, closer to find them in our mizziTANTE.at-Blog.
Recommended products:
![]() |
Temperature sensorTemperature only sensor: choose length from 21,60 EUR (20 % VAT incl. excl. Shipping costs) |
![]() |
Temperature and humidity sensorfrom 39,60 EUR (20 % VAT incl. excl. Shipping costs) |
Customers who bought this product also bought the following products:
![]() |
TME - Ethernet Thermometer with SensorTME is a Thermometer with direct output to Ethernet (IP Thermometer), Measuring range is -55°C to +125°C. TME has an internal WEB server, which allows you to view Temperature directly in your WEB browser - no additional software is required. TME is fully configurable via WEB interface, Temperature can be transmitted over TCP/IP in ASCII (no conversion needed). Supported protocols are: TCP, SNMP, SMTP (e-mail), MODBUS TCP a XML. Temperatue can be easily integrated in your existing WEB site vias standard HTTP GET functions. Sensor cable is 3 meters long as a standard. If you require, we can produce TME with up to 20m sensor lead. Do not hesitate to contact us if you need a different length. from 169,56 EUR (20 % VAT incl. excl. Shipping costs) |
![]() |
DIN rail holder - mountedMetal holder for DIN rail 35mm (TS 35), mounted on Papouch s.r.o. device. 9,12 EUR (20 % VAT incl. excl. Shipping costs) |
![]() |
THT2 - RS485 Thermometer and hygrometer with SensorMain module for digital sensors of temperature and humidity with dew point calculation. Communicaters via RS485 line - up to 1.2Km. Metal enclosure, detachable sensor (not included, sold separately). 75,84 EUR (20 % VAT incl. excl. Shipping costs) |
![]() |
TME multi: Temperature and humidity via EthernetA device for measuring temperature and humidity at up to 32 locations. Configuration and preview of all measured values via a website. TME multi is able to send the current values to the server using HTTP GET requests and can also communicate via SNMP and Modbus TCP protocols. When the critical limits are exceeded the system sends e-mail warnings or SNMP traps. 169,44 EUR (20 % VAT incl. excl. Shipping costs) |
![]() |
Temperature and humidity sensorfrom 39,60 EUR (20 % VAT incl. excl. Shipping costs) |
This Product was added to our catalogue on Thursday 03 April, 2014.