Analog measurement module AD4ETH is a four input A/D converter allowing you to measure up to four analogue signals 0-10V or 0(4)-20mA. Measured-out values can be viewed via a WEB interface, AD4ETH also supports TCP, SNMP and many other protocols.

Default input range is 0-10V or 0(4)-20mA.

Features of Ethernet A/D converter

• Four analogue inputs for voltage or current
• Each channel can have different range (upon request)
• Measuring range split into 10 000 pieces
• Mesuring rate: twice in a second for each channel
• Communication via Ethernet (LAN computer network)
• Wide power supply voltage range: 7 - 30 V DC
• Measuring is based on a single multiplexed 16 bit sigma-delta A/D converter
• SNMP, ModBus TCP, TCP (Spinel), UDP (Spinel), HTTP GET, HTTP POST (SOAP)
• Internal WEB server
• WAP pages for mobile view
• Measured data in XML format for easy processing in your own application
• AD4ETH supports sending the data in XML WEB service format by SOAP protocol
• A/D converter can automatically send the measurements to your server in an HTTP GET request body.
• E-mail notifications when a preset thresholds are exceeded.
• Real units calculation functions - you can see the values as a pressure, height, distance, temperature etc.
• Measurement software for windows as a free

Usage of IP A/D converter

• Digitalization of measured-out values from gauges with unified voltage or current ouput
• Reading or sensors with unified signals
• Reading values from flood sensors, pressure sensors, thermometers, height sensors etc.

File:

Datasheet AD4ETH AD4ETH datasheet	1.8 MB
Configuration software for AD4xx Configuration software for AD4xxx devices. AD4RS, AD4USB and Drak 4.  Current values are displayed. (Note: If your device is set to  communication speed other than 9600 od 115200 bps, you will have to  execute ad4setup with parameter baudrate: AD4setup.exe baudrate=[your  speed]	660.59 KB
Universal configuration software Universal configuration software for Papouch Ethernet devices. It allows  you to set-up your device even from another network range. It can set  basic network parameters even for a device in a different subnet than  your PC has. Ethernet Configurator homepage	533.55 KB
ad4xxx-drak4-modbus-rtu.pdf Communication protocol MODBUS RTU used in AD4 and Drak 4	470.22 KB
ad4eth-mib-table.zip SNMP MIB table for AD4ETH	1.28 KB
ad4-drak4-spinel.pdf AD4xxx Spinel protocol description + hysteresis principals footnote + instructions how to switch the protocol.	1.04 MB

Recommended products:

	Switching power supply unit 12V/0.5A with EU plug Switching power supply unit 12V / 0.5A. Wallplug adaptor type. Cable length 1,8m with bare wires or DC jack connector upon request. 12,00 EUR (20 % VAT incl. excl. Shipping costs)
	DIN rail holder - mounted Metal holder for DIN rail 35mm (TS 35), mounted on Papouch s.r.o. device. 9,12 EUR (20 % VAT incl. excl. Shipping costs)
	Wall holder - wide This wall holder can only be ordered along with the compatible product!   9,12 EUR (20 % VAT incl. excl. Shipping costs)

Customers who bought this product also bought the following products:

	DIN rail holder - mounted Metal holder for DIN rail 35mm (TS 35), mounted on Papouch s.r.o. device. 9,12 EUR (20 % VAT incl. excl. Shipping costs)
	TME - Ethernet Thermometer with Sensor TME is a Thermometer with direct output to Ethernet (IP Thermometer), Measuring range is -55°C to +125°C. TME has an internal WEB server, which allows you to view Temperature directly in your WEB browser - no additional software is required. TME is fully configurable via WEB interface, Temperature can be transmitted over TCP/IP in ASCII (no conversion needed). Supported protocols are: TCP, SNMP, SMTP (e-mail), MODBUS TCP a XML. Temperatue can be easily integrated in your existing WEB site vias standard HTTP GET functions. Sensor cable is 3 meters long as a standard. If you require, we can produce TME with up to 20m sensor lead. Do not hesitate to contact us if you need a different length. from 169,56 EUR (20 % VAT incl. excl. Shipping costs)
	Web Sensor T3510 - remote thermometer, hygrometer and pressure Ambient temperature, relative humidity t-line Web sensor. Remote alarm. 541,20 EUR (20 % VAT incl. excl. Shipping costs)